Usb Parameter Defaults - Motorola Symbol LS1203 Product Reference Manual

To set up the scanner:
Attach the modular connector of the USB interface cable to the cable interface port on the scanner (see
1.
Installing the Interface Cable on page
Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of
2.
the IBM SurePOS terminal.
Select the USB device type by scanning the appropriate bar code from
3.
On first installation when using Windows, the software prompts to select or install the Human Interface Device
4.
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The scanner powers up during this installation.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
If problems occur with the system, see

USB Parameter Defaults

Table 7-1 lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate bar
code(s) provided in the Parameter Descriptions section beginning on
NOTE See
default parameters.
USB Defaults
Table 7-1
USB Host Parameters
USB Device Type
USB Country Keyboard Types (Country Codes)
USB Keystroke Delay
USB CAPS Lock Override
USB Ignore Unknown Characters
Emulate Keypad
USB FN1 Substitution
Function Key Mapping
Simulated Caps Lock
Convert Case
1-2).
Troubleshooting on page
Appendix A, Standard Defaults
Parameter
USB Device Type on page
3-2.
page 7-4.
for all user preferences, hosts, symbologies, and miscellaneous
Default
HID Keyboard Emulation
North American
No Delay
Disable
Send
Disable
Disable
Disable
Disable
No Case Conversion
USB Interface 7 - 3
7-4.
Page Number
7-4
7-5
7-7
7-7
7-8
7-8
7-9
7-9
7-10
7-10