Function Key Mapping; Fn1 Substitution - Motorola Symbol LS1203 Product Reference Manual

5 - 10 Symbol LS1203 Product Reference Guide

Function Key Mapping

ASCII values under 32 are normally sent as control key sequences (see
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
*
Disable Function Key Mapping

FN1 Substitution

When enabled, the scanner replaces FN1 characters in an EAN128 bar code with a keystroke chosen by the user
(see FN1 Substitution Values on page
Enable FN1 Substitution
4-10).
Table 5-2 on page 5-12). When this
Enable Function Key Mapping
*Disable FN1 Substitution