Table of Contents
Advertisement
If the special function is activated and the Soil Moisture or
Rain Sensor indicates sufficient moisture, watering is interrupted.
The watering time of following watering programs is shortened
to 30 seconds (display:
1
min.) until the Soil Moisture / Rain
Sensor allows the watering programs to be resumed. The water-
ing time originally entered then begins.
Shortening the watering time when the soil is sufficiently moist
ensures that the Water Distributor automatic is switched to the
next outlet and therefore ensures that the correct order of the
watering program for the respective distributor outlet is retained.
1) All 6 outlets are connected (with or without sensor) :
When a device is connected to all 6 outlets, the special function
must be used (see page 19). If the sensor reports moisture, the
current programme is only carried out for 30 sec. so that the Water
Distributor will switch further.
2) 2 to 5 outlets are connected with a sensor :
If fewer than 6 outlets are connected and a sensor is used, then
the special function must be utilised. The non-used outlets must be
programmed with the minimum watering duration of 30 sec. (dis-
play 1 min.), so that the Water Distributor will switch further and
assignment of programme and outlet on the Water Distributor will
be maintained. Non-used outlets must be connected with a used
outlet so that no water leaks from the non-used outlets during
further switching. All setting levers on the Water Distributor must
be set on „On".
23
Hide quick links:
Advertisement
Table of Contents
