Special Function - Gardena MaxControl 1834 Operating Instructions Manual

Watering must not be carried out manually, as otherwise the
programmes will no longer be correctly assigned to the outlets.
If program data have already been inserted beforehand, a

Special function

RESET must be undertaken before the special function can
be set.
+
v Keep -key and OK-key pressed simultaneously for
2 seconds.
To ensure the Water Distributor automatic switches safely there
must be at least a 30 minute break between the programs entered
in the Water Computer.
When you have confirmed the special function with OK and
have entered the data for the first program (see 5. Program ming)
all the programmes which follow will be pre-programmed auto-
matically.
The pre-programming takes into consideration the 30 minute
break required between the programs as well as a minimum
1
watering time of 30 seconds (display: min.).
This watering time is required to allow the Water Distributor
automatic to switch to the next outlet and to ensure that the
order of the watering programs to the appropriate watering
line is retained.
The watering days entered for the watering program are valid
for all other watering programs.
21