Enter Watering Programs - Gardena MaxControl 1834 Operating Instructions Manual

Enter watering programs :

Prog.
1 1 2 3 4 5 6 2 3 4 5 6
Start
Time
1.
Prog.
1 2 3 4 5 6
Start
Time
2.
Prog.
1 2 1 2 3 3 4 5 6 4 5 6
Start
Time
3.
14
You must reset your Water Computer before selecting the
special function (see 6. Automatic Water Distributor).
v Reset : Keep
for 2 seconds.
Up to 6 watering programs can be inserted – or –
the special function can be selected.
1. Press Menu-key twice
S
(not necessary if the current time and day of the week
has been entered).
Program memory setting 1 flashes.
Run Time
2. Only if the Water Distributor automatic is used :
S
Select special-function
the OK-key (continue with step 4).
Program memory setting 1 is selected automatically,
Run Time Start Time and the hours section flash on the display.
3. Select program memory setting with the
S
(example: Prog. 3
OK-key.
Start Time and the hours section flash on the display.
Run Time
+
-key and OK-key pressed simultaneous
z
+
S with the
program 3) and confirm with the
-key and confirm with
+
-key