Read / Modify Watering Programs; Manual Operation - Gardena MaxControl 1834 Operating Instructions Manual

Read / modify
watering programs :

Manual operation :

Time
3rd 2nd Mo Tu We Th Fr Sa Su
Time
Th Fr Sa Su
3rd 2nd Mo Tu We
18
If a program has already been set on one of the 6 program
memory settings, this can be modified without having to compile
it from the beginning again.
1. Press Menu-key twice.
Program memory setting 1 flashes.
+
2. Press
– or –
modify program data with the
with the OK-key.
The valve can be opened or closed manually at any time.
A program-controlled open valve can also be closed early with-
out changing the program data (start time, watering duration
and watering days).
1. Press man. On / Off-key to open the valve manually
(or to close an open valve).
Run Time
Run-Time and the watering time in minutes (set to
in the works) flash for 5 seconds on the display.
2. Whilst the watering time in minutes is flashing, the watering
duration can be modified with the
0 : 59
and
Run Time
The valve is opened.
3. Press man. On / Off-key to close the valve early.
The valve is closed.
-key to move to the next program step
+
) (example: 10 minutes).
-key and confirm
30
0 : 00
+
-key (between
minutes