Advertisement
3
5.) REMOVE THE "A" PILLAR TRIM
a.) PULL THE TOP PORTION UNTIL THE PUSH PIN
EXTENDS APPROXIMATELY 12mm (1/2 ").
b.) SLIDE THE TRIM UPWARD UNTIL IT DETACHES FROM
THE PUSH PIN.
c.) PULL FIRMLY INWARD TO DETACH THE TRIM FROM
THE REMAINING CLIPS.
6.) ROTATE THE EXTENDED PORTION OF THE PUSH
PIN 45 DEGREES TO REMOVE IT FROM THE "A"
PILLAR.
7.) INSTALL THE PUSH PIN IN THE TRIM PANEL.
THIS MAKES THE TRIM EASIER TO REINSTALL.
8.) REMOVE THE DRIVER SIDE FRONT SILL.
1/14/08
10
Advertisement
