Mounting Di700A on the camera
Turn off the power switch of both Di700A
1.
and the camera.
Turn the lock ring of Di700A to loosen it all
2.
the way as shown in the picture.
Slide the mounting foot of Di700A into the
3.
hotshoe of the camera.
4.
Turn the lock ring in the opposite direction
and tighten it.
5.
Lock pin comes out to hook the foot at the
hotshoe for sure contact.
Removing Di700A from the camera
Loosen the lock ring and slide the mounting foot of Di700A off the hotshoe
of the camera. Make sure to turn the lock ring all the way to completely
clear the lock pin off the hooking slot on the hotshoe.
6