Wireless Slave Flash - Nissin Di700A Instruction Manual

Di700A has a wireless remote flash system as a slave unit. You can enjoy
creative flash photography with multiple lightings from the various directions. 3
slave modes are provided, Slave Digital (SD) for digital pre-flash system; Slave
Film (SF) for analogue flash system and Wireless TTL slave
remote. All channels and groups A/B/C may be used.
SD: In this mode, Di700A synchronizes to
the pre-flash system. The master flash is to
be set at TTL (E-TTL for Canon, i-TTL for
Nikon) mode.
You can select the power by rotating the dial,
from the left to right, 1/128 – 1/64 – 1/32 – 1/16 –
1/8 – 1/4 – 1/2 – 1/1 (Full) power.
Press the on/ off switch once to lock this
condition on your flash. (Press it again to
release the lock)
SF: In this mode, Di700A synchronizes to
the traditional single flash system. The
master flash is to be set at manual mode.
Studio lighting system synchronizes to this
mode. This mode is also available for open
flash, and for a standard flash in the market.
You can select the power by rotating the dial,
from the left to right, 1/128 – 1/64 – 1/32 – 1/16 –
1/8 – 1/4 – 1/2 – 1/1 (Full) power.
Press the on/ off switch once to lock this
condition on your flash. (Press it again to
release the lock)
Wireless TTL Slave - Optical
Transmission : For Canon and Nikon
systems: In this mode, Di700A synchronizes
to the wireless remote flash system. For
remote All channel group A/B/C digital flash.
You can select the group by rotating the dial then
press Set button.
Press the on/ off switch once to lock this
condition on your flash. (Press it again to release
the lock)
Press the Set button to leave the group.

Wireless Slave Flash

for wireless
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
Set
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
Set
12