Manual Exposure Flash - Nissin Di700A Instruction Manual

Manual Exposure Flash

In some occasions, or for special expression, you may need your
own flash exposure instead of the automatic controlled exposure.
You can set Di700A for non-automatic flash mode, and select the
desired flash power from 8 different levels
Set Di700A to the camera's hotshoe and press the on/off switch to
power on.
Rotate the dial to "M" mode then press the Set button.
You can select the power by rotating the dial, from the left to
right, 1/128 – 1/64 – 1/32 – 1/16 – 1/8 – 1/4 – 1/2 – 1/1 (Full)
power.
Press the on/ off switch once again to lock this condition on your
flash. (Press it again to release the lock)
Set the camera shooting mode to either [ AV ](Canon), [ A ](Nikon)
or [ M ].
Select your desired F--stop and / or shutter speed. Point the
subject and press the shutter.
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
11