Voice Activation - Motorola MBP35BL User Manual

4.4

Voice Activation

If you do not want the parent unit screen to be on continually, you can set
the VOX mode so that the screen only turns on if there is a sound near
the baby unit. The sound detection sensitivity level (VOX) of the Baby
Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level
can be increased so that only minor disturbances will cause the parent
unit screen to turn back on.
m
1. Press repeatedly until
< >
Press and
OFF
setting is ).
When the VOX function is on (level
will be turned on, and the LCD screen will switch off after a few seconds
if the detected sound is below the level selected.
5
Note: Level is the most sensitive and so will need to be the quietest
before the LCD will switch off.
m
2. Press repeatedly to exit.
NOTE
When the Voice Activation function is on, the voice Activation LED will be
turned on (red) and the display screen will switch off after a few seconds.
The LCD screen on the parent unit will be switched back on when the
sound level of the baby reaches the Voice Activation threshold or when
any key on the parent unit is pressed.
14
VOX
to adjust the VOX level to
MBP35BL, MBP35BW Parent Unit Menu Options
appears on the LCD screen.
OFF 1 2
, ,
1 5
to ), the Voice Activation
3 4 5
, , or (the default
)
LED
)
)