Activating/Deactivating - Mercedes-Benz E-Class Cabriolet 2016 Operator's Manual

For further information about ESP
( page 66).
Y
Start the engine.
X
Press the = or ; button on the steering
X
wheel to select the DriveAssist
Press 9 or : to select ESP.
X
Press a to confirm.
X
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
®
ESP is deactivated if the å warning lamp in
the instrument cluster lights up continuously
when the engine is running.
If the ÷ warning lamp and the å warning
lamp are lit continuously, ESP
due to a malfunction.
Observe the information on warning lamps
( page 227).
Y
Observe the information on display messages
( page 203).
Y
Activating/deactivating PRE-SAFE
Brake
®
PRE‑SAFE Brake is only available for vehicles
with the Driving Assistance package.
Press the = or ; button on the steering
X
wheel to select the DriveAssist
Press the 9 or : button to select
X
SAFE Brake.
Press a to confirm.
X
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
®
When PRE-SAFE Brake is deactivated, the
assistance graphic shows the æ symbol in
the multifunction display.
For more information on PRE‑SAFE
( page 69).
Y
Activating/deactivating COLLISION
PREVENTION ASSIST PLUS
Press the = or ; button on the steering
X
wheel to select the DriveAssist
Press the 9 or : button to select
X
lision Prevent..
®
, see
X
X
menu.
For further information about COLLISION PRE-
VENTION ASSIST PLUS, see (
Activating/deactivating Steering
Assist and Stop&Go Pilot
X
®
is not available
X
X
X
®
Further information about DISTRONIC PLUS
with Steering Assist and Stop&Go Pilot
(
Y
Activating/deactivating ATTENTION
menu.
ASSIST
PRE-
X
X
X
X
X
®
Brake, see
X
For further information about ATTENTION
ASSIST, see (
menu.
Col‐
Menus and submenus
Press a to confirm.
The current selection appears.
To activate/deactivate: press the a but-
ton again.
If COLLISION PREVENTION ASSIST PLUS is
deactivated, the assistance graphic shows
the æ symbol in the multifunction display.
Press the = or ; button on the steering
wheel to select the DriveAssist
Press the 9 or : button to select
+: Steer. Asst.
Press a to confirm.
The current selection appears.
To activate/deactivate: press the a but-
ton again.
When Steering Assist and Stop&Go Pilot are
activated, the multifunction display shows the
DTR+: Steer. Asst. On
page 160).
Press the = or ; button on the steering
wheel to select the DriveAssist
Press the 9 or : button to select
Attention Assist.
Press a to confirm your selection.
The current selection appears.
Press a to confirm.
Press the : or 9 button to set Off,
Standard or Sensitive.
Press the a button to save the setting.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the multifunction dis-
play in the assistance graphics display.
page 177).
Y
197
page 64).
Y
menu.
DTR
message.
menu.
Z