Altitude Hold - WLtoys q222g Instruction Manual

Altitude hold

This model is equipped with a barometer. The barometer allows the quadcopter to hold altitude without using the remote.
Starting the copter:
- Connect the battery to the copter.
- Turn on the remote
- Trottle up/down to connect drone to remote
- Arm the quad by moving trottle to left bottom and direction to right bottom
- By holding it down for more than 2 sec. you use the throttle to make height. By holding it down for just one seconde, the copter
- Trottle up and it will fly to approx 1m altitude and maintain hight
- Adjust altitude with throttle up/down
Ending:
- Keep light button (middle right) pressed for 1sec and it will autoland
- Alternatively throttle down and when it is securily landed disarm the quad by moving trottle to left bottom and direction to right
How to fly
Flying is really simple, but you need a little practice at first. Connect to www.wltoys.eu to watch educational films.
Copyright WLtoys.eu | DroneX BV
SIDEWARD
The directional lever serves to move the drone to the left or
the right.
FORWARD
Pushing the directional lever up and down makes your
drone go forward or backward.