Appendix. How To Reset Bios; Opening The Bios Setup Menu - FOR-A MBP-120SX Operation Manual

Appendix. How to Reset BIOS

This appendix explains how to reset the BIOS. Please follow the procedure below in case you need
to reset the BIOS due to the battery failure or such reason.

1. Opening the BIOS Setup Menu

1. Connect a PC monitor, keyboard, and mouse to your MBP unit and turn on the unit.
2. The screen appears as shown below. Press the F2 key.
* The F2 key is used to open the BIOS setup menu when BIOS is initialized due to various
causes such as the battery failure. The F2 key is used to open the BIOS setup menu while
the MBP unit is running normally.
3. The Phoenix SecureCore Tiano Setup page is opened.
On the menu bar, select the menu page using the right and left arrow keys.
The Configuration menu page is displayed in the figure below.
Submenu
Parameters
27
Menu bar