TO FOllOw INSTruCTIONS mAY rESulT IN PrOPErTY dAmAgE, bOdIlY INjurY, Or EvEN dEATh. FOr uSE IN ThE u.S. ANd CANAdA. SuITAblE FOr INSTAllATION IN mObIlE hOmES IF ThIS hArmAN ACCENTrA PEllET STOvE IS NOT PrOPErlY INSTAllEd, A hOuSE FIrE mAY rESulT. FOr YOur SAFETY, FOllOw INSTAllATION dIrECTIONS.
maintenance The glass used in your stove is manufactured to exact Creosote - Formation and Need for removal - standards to withstand the high heat of the fire, but like When wood is burned slowly, it produces tar and other all glass, it must be treated with common sense and organic vapors, which combine with expelled moisture care.
maintenance - Cleaning Ash removal Due to potential high temperatures, it is recommend- ed that the stove be out and cool prior to removing the ash pan. Open the front door and grasp the ash pan by the handle. With the ash pan removed, swing the handle upward for carrying.
maintenance - Cleaning 2. Remove the combustion intake assembly. See Fig. 35. The combustion intake assembly is held into place with two swing latches. See Fig. 37. Swing each latch until it hangs down away from the retainer stud. Now the assembly can be taken out by tilting the right side outward first through the lower door opening.
Page 5
maintenance - burn Pot burn Pot Cleaning and maintenance Whenever loading fuel into the hopper, take the opportunity to scrape the top holed surface and sides of the burn pot down to auger tube.(Fig 39) It is not necessary to completely remove all material from the burn pot.
3% or more. 5. Combustion blower fan blades may need The Accentra is capable of burning all 3 categories of cleaned. pellets due to a patented feeder and burn pot system.