Kenmore 2800*010 Use & Care Manual page 11

Top-loading high efficiency low-water washer
Table of Contents

Advertisement

Available languages

Available languages

Wash Temp
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Warm
Some cold water may be added,
so this will be cooler than what
your previous washer provided.
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Tap Cold
This is the temperature from
your faucet.
11.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Prewash or 2nd Rinse. These can be turned
off, if desired.
NOTE: Not all options are available with all cycles.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
12.
Select Start/Pause/Unlock Lid
to begin wash cycle
Press the START/PAUSE/UNLOCK LID button to start the wash
cycle. Filling is delayed for several minutes while load balance
is sensed. When the cycle has finished, the Cycle Complete
indicator will light and the end of cycle signal will sound (if
set). Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments, you
may do so during the first portion of the Sensing step. Press
START/PAUSE/UNLOCK LID; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and press
START/PAUSE/UNLOCK LID again to restart the cycle. If lid is
left open for more than 10 minutes, the water will pump out.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load
unbalance. You will hear the hum of the spin prior to filling.
This is normal operation.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2801*010

Table of Contents