Select Cycle - Kenmore 2800*010 Use & Care Manual

6.
Add fabric softener to dispenser
Fabric softener tray
Pour a measured amount of liquid fabric
softener into tray; always follow manufacturer's directions
for correct amount of fabric softener based on your load size.
Close dispenser drawer, then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected to
ensure proper distribution at correct time in cycle. Do not
overfill or dilute. Overfilling dispenser will cause fabric
softener to immediately dispense into washer.
If 2nd Rinse option is selected, fabric softener will be
dispensed into the last rinse.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
7.
Add Oxi Booster to dispenser
Oxi-Booster tray
Pour a measured amount of Oxi-booster into
tray; always follow manufacturer's directions for
correct amount of Oxi-booster based on your load size.
Close dispenser drawer, then select TimedOxi option.
IMPORTANT: TimedOxi option must be selected to ensure
proper distribution at correct time in cycle. Do not overfill
or dilute. Overfilling dispenser will cause Oxi-booster to
immediately dispense into washer.
10
8.
Press POWER to turn on washer
Make sure the dispenser drawer is closed completely, then
press POWER to turn on the washer.
9.

Select cycle

Turn cycle knob to choose your wash
cycle. The indicator for Estimated Time Remaining will light up
with a cycle time. For more information, see "Control Panel".
10.
Select cycle settings
Once you select a cycle, the default settings for that cycle
will be lit. Press the cycle modifier buttons to change the
Wash Temp, Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.