Panasonic TX-L19XM6E Operating Instructions Manual page 8

Installing / removing remote's batteries
1
Remove the battery compartment cover.
Hook
Caution
● Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
● Do not mix old and new batteries.
● Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese
batteries).
● Do not use rechargeable (Ni-Cd) batteries.
● Do not burn or break up batteries.
● Do not expose batteries to excessive heat such as sunshine, fire or the like.
● Make sure you dispose of batteries correctly.
● Ensure batteries are replaced correctly, there is danger of explosion and fire if battery is reversed.
● Do not disassemble or modify the remote control.
8
2
Insert two R6AA batteries (1.5V) according to "+" and
"-" polarity markings inside the battery compartment,
then close the battery compartment cover.
Pull open
Note the correct
polarity (+ or -)
Close