Panasonic TX-L19XM6E Operating Instructions Manual page 33

Set Analogue channel manually [Analogue Manual Tuning]
Set Analogue channel manually after [Automatic Channel Search].
Example: Antenna
Analogue Manual Tuning
Searching channels
Start Frequency (MHz)
Scan up
[Scan up]: Scans ascendingly from the entered
frequency to higher frequencies.
[Scan down]: Scans descendingly from the entered
frequency to lower frequencies.
Checks the DVB-C / DVB-T signal condition
DVB-C
DVB-C Signal Condition
Frequency (KHz)
Modulation 256QAM
Symbol Rate(Ksym/s)
Signal Level
Signal Condition
Bit Error Rate 0.00E-06
Set DVB channel manually [Manual Tuning]
Normally use [Automatic Channel Search] or [Scan] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
● All channels found will be added to the [Channel List].
DVB-C
DVB-C Manual Tuning
Scan
Frequency (KHz)
Modulation Auto
Symbol Rate(Ksym/s)
Signal Level
Signal Condition
List favourite DVB channels [Favourites Edit], Skip unwanted channels [Skip]
Create your favourite channel lists from various broadcasters.
1
Select a channel to list
Favourites Edit
BBC ONE Wales
1 Analogue
BBC THREE
2 Analogue
3 Digital BBCi
4 Digital CBBC Channel
„ Skip unwanted channels [Skip]
You can hide unwanted channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Select a channel and reveal / hide
Skip
1 Analogue BBC ONE Wales
Analogue BBC THREE
2
3 Digital BBCi
4 Digital CBBC Channel
● To change page (page up)
(red)
1
48.00
Scan down
2
These bars
show the
322000
maximum
signal value of
6875
the selected
96
91 channel.
1
Enter the frequency
Cable
abc def
ghi jkl mno
0%
pqrs tuv wxyz
306000
2
6875
0
0
OK
scan
OK
OK
● To change page (page down)
(green)
Enter the frequency to start scanning
abc def
ghi jkl mno
pqrs tuv wxyz
Select the scanning method
select
OK
access
DVB-T
DVB-T Signal Condition
Channel
Signal Level
Signal Condition
Bit Error Rate
DVB-T
DVB-T Manual Tuning
Scan
Channel
Signal Level
Signal Condition
select channel
OK
scan
select
[Add] / [Remove]
select
access
● To select
(yellow)
6875
96
91
0.00E-06
Antenna
0%
2
0
0
: [Add]
: [Remove]
: Hide (skip)
: Reveal
● To exit
(blue)
33