Hotkey - FaVal Aquila T 200 User Manual

Digital Terrestrischer Receiver FaVal Aquila T 200/
_____________________________________________________________________________________

9 Hotkey

Standby
Press [Power] Key can enter the Standby state
In Standby state, press [Power] Key again can call back the unit and go on play the
previous channel.
User can also disconnect the device's main power to end the Standby state.
CH+/CH-
In full screen, press [Up/Down] to change channel.
V-/V+
In full screen, press [Left/Right] to adjust volume.
Number
In full screen, use number key and after 2 seconds it will go to the channel or press
[OK] key to change channel directly.
TV/RADIO
In TV mode, press [TV/RADIO] key can switch to Radio mode. In Radio mode, press
[TV/RADIO] key to switch to TV mode.
Channel list
In full screen, press [OK] key can enter "Channel List",
please refer to TV Channel List for detail information.
In "Channel List" menu, press [OK] key to play the
highlighted channel.
Audio
In full screen, press [Audio] key can open the"Audio
Mode" window.
You can move highlight by press [Up/Down] key and
switching each selection by press [Left/Right] key
Press [Exit] key to exit.
EPG
The STB has an Electronic Program Guide (EPG) to help you navigate channels
through all the possible viewing options. The EPG
supplies information such as channel listings and
starting and ending times for all available programs
Press [EPG] key to display EPG screen.
Press [OK] key can see the program detail information.
Press [Left/Right] key can switch time by hour.
Press number key [1] can display all programs schedule
information of the selected channel. The window is like
below:
Press [Menu] key to exit.
Digital Terrestrial Receiver
- 15 -