Auto Scan; Channel Scan; Tuner Setting; System Setup - FaVal Aquila T 200 User Manual

Digital Terrestrischer Receiver FaVal Aquila T 200/
_____________________________________________________________________________________

6.1 Auto Scan

When you enter to "Auto Scan" menu, there will display
the screen like below: (If channel lock is "On", input
password first. Default password is "0000")
Firstly please select the country in System Setup Menu
●
/ Region and Time / Region, such as "France".
In "Scan Mode" item, press [Left/Right] key to select
●
scans all channels or just scans free channels.
Moving the highlight to "Search" item and press [OK]
●
key to start scanning.
In the "Auto Scan" menu, press [Exit] key to draw back from the scanning.
●

6.2 Channel Scan

When you enter to "Channel Scan" menu, there will
display the screen like below:
There are two modes. You can scan channel by
●
channel or by frequency".
When scan band is UHF and region is "France", the
●
range of Ch No. is from 21 to 69. When scan band is
VHF and region is "France", the range of Ch No. is
from 1 to 9. (it's according to region)
When you complete your modification, move
●
highlight to "Search" item and press [OK] key, then it will begin to scan.
Press [Exit] key to exit the scanning.
●

6.3 Tuner Setting

When you enter to "Tuner Setting" menu, there will
display the screen like below:
Tuner Power: On / Off

7 System Setup

When you enter to "System Setup" menu, you will see
the screen
like below:
In "System Setup" menu:
●
Press [Left/Right] key to select menu pages among
●
Channel, Installation, System and Tools.
Press [Up/Down] key to select menu items among
●
each item.
Press [OK] key to enter the selected item.
●
Digital Terrestrial Receiver
- 9 -