Electrical Requirements; Temperature Guide - Morphy Richards Advanced Finish 40743 Instructions Manual

RN40743 MUK Rev6:40715 rev3 27/03/2009 14:18 Page 3
• When ironing is complete,
remove the plug from the
socket, empty any remaining
water from the tank, and allow
to cool before storage.
• If you drop or severely knock
your iron, this could cause
internal damage even if the
outside appears alright. Have it
checked by a qualified
electrician.
• It is recommended that you use
up one beaker of water by
operating your iron's steam and
shot of steam functions before
ironing any clothes, as some
dripping may occur while your
iron's steam system is activated.
INSTRUCTIONS FOR USE

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
Do not iron
Control knob
at all
positions
Fabric
Ironing
With water in tank
Without water in tank
For details of other Morphy Richards products, please see our website:
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
WARNING: A damaged or
severed mains cable fitted
with a plug should never be
connected to the mains
supply. It must be destroyed,
as a damaged cable becomes
hazardous if connected to a
power socket.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance
must be earthed.
(120°C Max) Cool (160°C Max) Warm
Nylon, Acetates Wool, Polyester
e.g. Acrilan mixtures e.g.
Courtelle, Orlon Polyester/Cotton
Triacetates, e.g.
Tricel/Polyester
Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
Dry and spray
Dry ironing
(210°C Max) Hot 'Max' Setting
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Steam/spray/shot of steam
Self clean
3