Led Display - Phoenix Audio Technologies CONDOR MT600 User Manual

LED DISPLAY

There are four LEDs located between the grills in the front of the unit. Each LED can emit an
either blue or red light.
LIGHT INDICATIONS
Function
Direction of voice being picked up Lights point towards voice
Device powered on
Device searching for an IP
address
Device finding an IP address
Device failed to locate an IP
Mute
Telephone Ringing
End of call
Programing
Direction- BLUE
‣
Power on- indicated by
‣
‣
Searching for IP address- indicated by
and repeating the above.
‣
Finding an IP- right after searching for an IP display, all four
‣
Failed to find IP- right after searching for an IP display, all four lights will flash
times.
‣
Mute- all four lights will continuously flash
‣
Telephone ringing- all four lights will flash
‣
End of call- all four lights will turn
‣
Programing- when the unit is updating software
programing is complete.
Page 8
BLUE
direction
Lights running right to left,
followed by left to right
Lights accumulating right to left,
clearing, and repeating
All four lights flashing
All four lights will flash until call
is picked up
Lights will run side to side until
programing is complete
LED lights will display the direction of the voice it is currently picking up.
BLUE lights running right to left followed by left to right
RED
Lights
All four lights flash three times
All four lights continuously flash
until function is disabled
All four lights will appear for a
few seconds
BLUE lights accumulating right to left, clearing,
BLUE
RED until mute is deactivated.
BLUE until call is picked up.
for a few seconds
BLUE lights run side to side until
RED Lights
lights will flash.
RED three