Spektrum DX20 Instruction Manual page 14

EN
x-PLUS
x-Plus Channels and Failsafe
Failsafe is not supported for servos connected to the X-Plus
Module. No failsafe should be expected or attempted for a servo
connected through the X-Plus Module. However, servos connected
to the X-Plus Module will hold last command in the event of a
failsafe condition.
To Activate X-Plus
1. Open the Frame Rate Menu in System Setup.
2. Scroll to X-Plus and press the scroll wheel to activate. The X-
Plus Inputs screen is now active in the Channel Assign menu.
If you select 11ms frame rate before you activate X-Plus, the
transmitter reverts to 22ms frame rate when X-Plus is active.
CAUTION: Do NOT connect throttle or any primary
control surface to the X-Plus Module. The X-Plus chan-
nels are intended to be used for auxiliary functions only. X-Plus
channels have a resolution of 512 and variable latency from
22ms to about 88ms. When X-Plus is active, the first 10 chan-
nels default to 22ms.
Refer to community.spektrumrc.com for more information
about X-Plus options.
14
from Channel Assign menu
SPEKTRUM DX20 • TRANSMITTER INSTRUCTION MANUAL