Table of Contents
Advertisement
Installation
Connecting the system
AV receiver
TMC antenna
(supplied)
Attach the GPS antenna to
the "GPS ANTENNA" jack
on the side of this product.
3 m (9 ft. 10 in.)
GPS antenna (supplied)
Affix the double-sided tape (supplied)
on the surface as level as possible
where the GPS antenna faces the
window. Place the GPS antenna on
the double-sided tape.
RGB cable (supplied)
2.65 m (8 ft. 8 in.)
TMC antenna IF
Yellow (B+)
To the terminal that the power is always supplied
Fuse (3 A, 250 V)
regardless of the ignition switch position.
Insert one end of the RGB cable into the "DATA BUS"
slot on the side of this product and secure it with an
11 mm (.4 in) screw (supplied). Connect the other
end of the cable to RGB IN input on the back of your
Pioneer AV receiver.
2 m (6 ft. 7 in.)
Where applicable, secure the cable to
the AV receiver using an 11 mm (.4 in)
screw (supplied).
The navigation unit
Power cord (supplied)
Black (GND)
To vehicle (metal) body.
Secure the RGB cable with
the 11 mm (.4 in) screw
Chapter
13
Advertisement
Table of Contents
