Table of Contents
Advertisement
3
Insert the assembled handle piece into the steam
mop base. Push the tube base together until you
hear a click. (fig. 2)
4
For your comfort, you can adjust the height
of the mop. Just lift the latch on the tube 90
degrees to the open position. Holding the
handle, extend the tube to the desired height
and then close the latch to the locked position.
(fig. 3)
QUICk tIP: For easier pushing and pulling,
extend the handle length.
fig. 2
CUSTOMER CARE - AU: 1800 890 840
fig. 3
ImPORtaNt: Never use the Shark
Lite Steam Mop without attaching a microfibre
cleaning pad to avoid damage to your floor and
mop.
ImPORtaNt: Do not use on unsealed wood
or unglazed ceramic floors. On surfaces that
have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended to
test an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
Steam
®
3
Advertisement
Table of Contents
