Shark S3251NZGN Owner's Manual page 12

Using Your Shark
fig. 6
ImPORtaNt: Your steam mop needs water to
make steam! Never use your steam mop without
water in the tank.
Sweep or vacuum your floors prior to cleaning
with your Shark Steam Lite Steam Mop.
®
CUSTOMER CARE - NZ: 0800 002 999
6
Steam Lite Steam mop
®
When you use your steam mop for the first time or
if you have not used the unit in awhile, it may take
a minute or two for the water to travel through the
pump and into the heater to create steam. Get it
started by pumping the handle a few times. If you
have waited a few minutes and you still do not see
any steam, reference the troubleshooting section on
page 10.
fig. 7
1 Pull and twist the quick release cord holder to
unwrap the power cord completely. (fig. 6) Plug
into an electrical outlet. The "On" light will turn
blue. If the light does not turn on, reference the
troubleshooting section on page 10. (fig. 7)