Sony IJ1001M User Manual page 19

Installation
Connect to a Host
You can confirm the information on the controller and
modules by connecting to the CAN communication and
RS232C communication terminal of the controller.
Connect to Earth
Connect the  terminal on the controller to earth.
Confirm the Status of the Controller
and Modules
You can confirm the status of charge/discharge, remaining
capacity, current/voltage value, etc., on the display panel of
the controller. Press the DISP button (3 seconds) to switch
display information. For further details, refer to "Display Panel"
in "Part Names and Functions" on page 12.
Turn off
Turn off the POWER ON/OFF switch of the controller.
The controller and all modules are turned off.
19