LG VUP152NJP Service Manual page 12

DISASSEMBLY
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical
shock or personal injury from cleaner suddenly starting.
Step 4: Disassembling head of
the cleaner(agitator, belt, pedal
assembly, etc.)
Turn the cleaner over to exposure the underside.
To remove the bottom plate, unscrew(optional) and
slide latch off as shown in the figure.
Pushing the locking tabs toward the center of the
vacuum, pull the bottom plate away from the nozzle
housing.
Remove the belt from motor shaft, then grasp the ends
of agitator and lift it slowly.
Unscrew and remove the pedal assembly.
Pull the left side of the head cover off the body, then
remove right side of the head cover.
Push the right edge of connector pipe to turn and set
the position to remove.
Side connector pipe of the head cover.
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
A
A
B
B
Agitator
C
C
Belt
D
D
12 LGE Internal Use Only