Interrupting The Programme; Terminating The Programme; Changing The Programme - Bosch SMI88TS00G Instruction Manual

About the Eco drying function:
When Eco drying is activated in the
Eco 50° programme, the door opens
automatically when the programme
ends. This ensures the best possible
drying result. Low amounts of steam
may occur. If you install the appliance
under a worktop, fit the supplied
steam protection film * (follow the
procedures in the installation
instructions). The steam protection film
protects sensitive fitted furniture and
worktops from damage by water
vapour. Before opening the appliance,
leave it to cool down for a while in the
remaining programmes when the
programme ends.
* depending on the features of your
dishwasher

Interrupting the programme

Caution!
Expansion (overpressure) may cause
the appliance door to jump open and/or
water to escape! If the door was opened
on an appliance which has a hot water
connection or is heated, always leave
the door ajar for several minutes and
then close.
Open the door.
1.
Switch off ON/OFF switch (.
2.
The LEDs go out. The programme
is saved.
To continue the programme, switch
3.
on the ON/OFF switch ( again.
Close the door.
4.
Operating the appliance en

Terminating the programme

(Reset)
Open the door.
1.
p r o g r a m m e T e r m i n a t i n g t h e
Press the START button )" and
2.
hold for 3 seconds
The display window at the top @
and the front display * ): show:
"Program was terminated".
Close the door.
3.
The programme sequence lasts
approx. 1 min. The display window
at the top @ shows: "Finished".
Open the door.
4.
Switch off ON/OFF switch (.
5.
Close the door.
6.
* depending on the features of your
dishwasher

Changing the programme

When the START button )" has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).
33