Pioneer AVH-X8650BT Owner's Manual page 67

Message Cause
The SD memory card is not
Incompatible SD
supported by this product.
The USB connector or USB
cable is short-circuited.
Check USB
The connected USB stor-
age device consumes more
than maximum allowable
current.
Files that cannot be
Video resolution not
played on this product are
supported
included in the file.
USB1 was discon-
The USB connector or USB
nected for device
cable is short-circuited.
protection. Do not
re-insert this USB
The connected USB stor-
memory into the unit.
age device consumes more
Press reset to restart
than maximum allowable
USB memory.
current.
USB2 was discon-
nected for device
protection. Do not
The USB interface cable
re-insert this USB
for iPod / iPhone is
memory into the unit.
short-circuited.
Press reset to restart
USB memory.
Audio Format not
This type of file is not sup-
supported ported on this product.
iPod
Message Cause
Error-02-6X/-9X/-DX iPod failure.
The iPod firmware version
Error-02-67
is old.
Action
Reference
Remove your device and replace it
with a compatible SD memory card.
69
Format the SD memory card. It is
recommended that you use SD
Formatter for formatting SD mem-
ory cards.
69
Check that the USB connector or
USB cable is not caught in some-
thing or damaged.
Disconnect the USB storage device
and do not use it. Turn the ignition
switch to OFF, then to ACC or ON
and then connect a compliant USB
storage device.
Select a file that can be played.
70, 74
Check that the USB connector or
USB cable is not caught in some-
thing or damaged.
Disconnect the USB storage device
and do not use it. Turn the ignition
switch to OFF, then to ACC or ON
and then connect a compliant USB
storage device.
Confirm that the USB interface
cable for iPod / iPhone or USB
cable is not caught in something or
damaged.
Select a file that can be played.
70, 74
Action
Disconnect the cable from the
iPod. Once the iPod's main menu
is displayed, reconnect the iPod
and reset it.
Update the iPod version.
Bluetooth
Message Cause
The power failed for the
Error-10 Bluetooth module of this
product.
MirrorLink
Message Cause
The application list Failed to load the applica-
could not be read out. tion list.
There is no supported
No supported applications
application on your
can be found.
MirrorLink device.
Communication error There was a communica-
occurred. tion error.
Launching the applica- Failed to launch the
tion failed. application.
Appendix
Action
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
Action
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
Install MirrorLink compliant appli-
cations to your MirrorLink device.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
Try again.
67
En