Advertisement
Setting Up Bluetooth Wireless
Streaming Audio With Bluetooth
Once you've paired and connected your device with the speaker, you can control music
playback from the palm of your hand. Select your music, stop it, change songs and playlists,
all right from your device's screen.
To adjust volume: Press the Volume +/– buttons on back of the speaker.
To disconnect from the speaker: Either turn Bluetooth off on your device or choose
"Disconnect" from the list of options in your device's Bluetooth settings.
To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the
speaker to fi nd and connect to your device. If the speaker still hasn't found your device (which
may happen if, for instance, another device has been connected after yours) make sure the
speaker isn't connected to another device currently. Then select the AR SPEAKER from the
list of Bluetooth connections available in your device's Bluetooth menu to connect to it.
Using the Auxiliary Audio Input
Making a Direct Connection
Turning the Speaker Off
1. Press the On-Off on the back of the speaker to turn the speaker off.
2. Confi rm that the speaker is off by verifying that the indicator light on the speaker's back
panel is no longer illuminated.
1. Connect one end of the provided 3.5mm audio in
cable to the Audio Input jack on the back of the
speaker.
2. Connect the other end of the cable to the headphone
output on your MP3 player or other portable audio
device.
3. If the speaker isn't already on, press the On-Off button
to turn it on.
Warning:
This product is designed to work with
line level outputs or headphone outputs only.
NOT
connect it directly to speaker outputs as it will
permanently damage the speaker.
Troublesho
The following troubleshooting guid
associated with the installation an
please call toll-free at 1-800-732-6
Issue:
No sound
Cannot pair
the speaker
with your
Bluetooth
device
DO
Specifi catio
Speaker
• Bluetooth® wireless technology: Blu
• 2-way acoustic design: 10 Watt rated
• Audio output power: 7 Watt RMS (M
• Audio line-in
• Distortion : 1%
• S/N Ratio : 65dB (typical)
• Operation distance : Up to 10 meters
• Frequency response: 20Hz - 20kHz
• Operates using supplied AC adapter
*Maximum range; results may vary acc
Cause and solu
• Check that the AC
cord from the AC
or
• If you're using bat
correct polarity (+
• Confi rm that the s
• Check that the au
transmitting soun
• Make sure the vol
• Check that the sp
• Move the Bluetoo
technology genera
vary based on oth
etc.
• Make sure you ha
audio with Bluetoo
• Make sure you en
• Make sure the Blu
• Move the Bluetoo
technology genera
vary based on oth
etc.
• Make sure your de
• Turn off all other
Advertisement
