Advertisement
2
ATTENTION:
Safety is paramount!
Only connect your mill to a properly installed
socket with earthing contact.
Do not use defective units.
If the mains cord is damaged, only the
manufacturer, its customer service department
or a qualified professional may replace it.
Only authorised hawos professionals may
perform repairs.
Never operate your mill unattended!
Never reach into the funnel or flour outlet
when the unit is operating – risk of injury!
Before opening the housing, be absolutely sure
to pull the mains plug to prevent the unit from
accidentally activating – risk of injury!
Safety is paramount
This device is not intended for use by persons
(including children) with impaired physical,
sensory or mental abilities or who lack
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or have been instructed by such a
person in how to use the device. Children
must be under supervision to ensure that they
do not play with the device.
Never immerse the device in water.
hawos flour mills are equipped with an overcur-
rent circuit breaker that protects the motor from
excessive current consumption (e. g. if debris jams
the grindstones).
Funnel
Adjusting lever
Brass screws
(top) Fixed grindstone
Milling chamber
(bottom) Rotating
grindstone
Flour outlet
On/Off switch
Before first use
Dear mill owner,
We are delighted that you have
decided on a hawos flour mill!
Your hawos will serve you well in preparing your
natural food cuisine for many years to come.
Please observe the following notes before using it
for the first time. Please carefully read through
these operating instructions to familiarise yourself
with your hawos. It will reward you with
reliability and convenience.
Proper use
The mill is conceived and designed for private
household use. The device is intended for grinding
the mill feed listed on page 5.
Product contents
Mill, funnel lid
Brief instructions
• Connect to a properly installed socket with a
protective earthing contact
• Place the flour bowl under the flour outlet
• Set the fineness with the lever
• Fill the funnel with the desired grain
• Turn the device on, adjust the fineness as
needed
• Turn off the device once you have finished
grinding
• Only use the flour mill for grinding food! A
table of edible mill feed is provided on page 5
Before first use
Before you use the device for the first time, please
first carefully read through the safety instructions and
operating instructions. Only in this way will you be
able to use all functions safely and reliably. Hold onto
these operating instructions for future reference. Pass
these operating instructions on to any subsequent
user of the product.
1. Removing the transport guard
(see page 4 "Start-up")
2. Mill feed
Please only use clean and dry grains. You can
determine this if the seed crackles distinctly when
you crush it against a hard surface with a spoon. Wet
grain can be crushed and then looks like an oat flake.
Please consult the table of mill feed on page 5 when
adjusting the fineness. Please only mill sweet corn for
grinding corn.
Only process mill feed with the device once.
3. Power supply
Only connect the mill to an alternating current
source. Check whether the existing mains voltage
corresponds to the voltage specified on the base
plate.
4. Location
The mill housing is made of wood. Wood is a living
material that is affected by changes in temperature
and humidity, which may cause it to crack. You can
best protect and care for the housing by not placing
the mill close to radiators and not placing it right next
to a stove (steam, moisture).
5. Setting up the mill
During use, place the flour mill on a hard, level
base (kitchen countertop). The slots on the bottom of
the device may not be obstructed so that the motor
can be ventilated.
3
Advertisement
