Brother HL-3150CDN User Manual page 99

General Information
Network Menu for HL-3170CDW
Submenu 1 Submenu 2
Wired LAN TCP/IP
Ethernet
Wired Status -
MAC Address
Set to Default Restores wired network settings of the internal print server to the factory default.
Wired Enable -
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Auto* / Static / RARP /
Boot Method
BOOTP / DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
0 / 1 / 2 / 3* / ... / 32767
IP Boot Tries
On* / Off
APIPA
On / Off*
IPv6
- Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
- -
On* / Off
Descriptions
Chooses the IP method that
best suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
1
Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method is set to any
setting except Static.
Automatically allocates the IP
address from the link-local
1
address range.
Enables or disables the IPv6
protocol.
Chooses Ethernet link mode.
Shows Ethernet link status.
Shows MAC address of the
machine.
Chooses Ethernet link mode.
3
93