Starting The Netfinity Manager Installation Program - IBM Netfinity 4500R User Reference Manual

Netfinity Manager

Starting the Netfinity Manager installation program

30
IBM® Netfinity® 4500R User's Reference
Note: Systems using Netfinity Manager with Microsoft SNA Server cannot
communicate with systems that run the Microsoft SNA Server client.
Netfinity Manager supports only server-to-server communications
between systems that run Microsoft SNA Server software. However,
Netfinity Manager systems running Microsoft SNA Server can
communicate with other Netfinity Manager systems using any of the
other supported SNA stacks.
• A 9600 baud or greater modem (optional).
The hard disk requirement for Client Services for Netfinity Manager is 6.5 MB–9 MB
of hard disk space. All other system requirements are the same as for Netfinity
Manager for Windows NT.
Notes:
1. Serial Connection Control will not function on systems that do not have a
properly installed and configured modem.
2. To most effectively manage Windows NT systems, any user that will be using
Netfinity Manager on a Windows NT system (locally or remotely) must have
administrator-level access to the system.
For instructions on installing Client Services for Netfinity Manager, see the
documentation listed in "Getting more information about Netfinity Manager" on
page 53.
To start the Netfinity Manager installation program on a system that is running
Windows NT 4.0:
1. Start the computer with your operating system.
2. Place the ServerGuide Netfinity Applications CD into the CD-ROM drive.
3. Follow the instructions for your operating system below:
• OS/2 Warp Server
a. From a command prompt, type
x:
where x is the CD-ROM drive letter, and then press Enter.
b. Type
SCOS2
and then press Enter. The ServerGuide Netfinity Applications windows
opens.
c. Select IBM Netfinity Manager from the Available Applications
selection list.
Note: To install Client Services for Netfinity Manager, select Client
Services for Netfinity Manager from the Available
Applications list and then refer to the Client Services for Netfinity
Manager User's Guide for additional installation instructions.
d. Click Install Product to start the installation process.
• Windows 95, 98, or NT
a. Click the Start button.
b. Click Run... from the Start button menu.
c. Type