Table of Contents
Advertisement
Erasing all tracks in an MD
(ALL ERASE)
The data recorded in an MD can be erased entirely.
1 Press EDIT on the main unit or on the remote control unit
to select "ALL ERASE".
EDIT
OR
The ALL ERASE indicator lights up.
Each press of the button switches the editing functions as follows.
2 Press SET on the main unit or on the remote control unit.
SET
OR
•
If the display shows "TRACK PROTECTED", one or more of the tracks in the MD
has been protected against accidental erasure by another component. You cannot
edit such a protected track. To cancel the editing, press EDIT on the main unit or on
the remote control unit.
3 Press ENTER on the main unit or on the remote control
ENTER
unit.
OR
The change made above is entered temporarily in memory. The display shows
"EDITING" and the TOC indicator lights up.
4 Press 0 on the main unit or on the cover panel of the
OR
remote control unit to eject the MD.
The data in memory is written in the MD before it is ejected.
The display shows "UTOCwriting" during MD writing operation.
•
Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the recording may not be able to play later.
•
The data in memory is written in the MD also when the power is turned off while
"EDITING" is being displayed.
To cancel editing:
Press EDIT repeatedly on the main unit or on the remote control unit before pressing
ENTER in step 3.
Caution
• Once erased, the tracks can never be restored. An MD
containing recording that you do not want to erase should
be protected by sliding the protect tab (see page 14).
DIVIDE
JOIN
MOVE
(MD total playing time display or Disc title)
ALL ERASE
ERASE
Canceled
Blinks
Blinks
1 2 3 4 5
6
1 2 3 4 5
6
25
Advertisement
Table of Contents
