JVC XM-448BK Instructions Manual page 25

Hide thumbs Also See for XM-448BK:
Table of Contents

Advertisement

2 Press SET on the main unit or on the remote control unit.
SET
OR
3 Select a track to be joined with the previous track.
Select a track number by turning the jog dial on the main unit or by pressing < / 4 or
¢ / > on the remote control unit.
OR
SET
4 Press SET on the main unit or on the remote control unit.
OR
The selected track numbers blink in the music calendar, indicating that these tracks will
be joined into one.
5 Press ENTER on the main unit or on the remote control
unit.
ENTER
OR
The change made above is entered temporarily in memory. The display shows
"EDITING" and the TOC indicator lights up.
6 Press 0 on the main unit or on the cover panel of the
remote control unit to eject the MD.
OR
The data in memory is written in the MD before it is ejected.
The display shows "UTOCwriting" during MD writing operation.
To cancel editing:
Press EDIT repeatedly on the main unit or on the remote control unit before pressing
ENTER in step 5.
To restore the original tracks from the track obtained by
joining:
Use the DIVIDE editing function.
See "Dividing a track (DIVIDE)" on page 19.
You can also use the numeric keys on the cover panel of the remote control to select
a track number. To select a track, see "Selecting a track with the numeric keys" on
page 9.
Example) To join track numbers 1 and 2, select track number 2.
If you selected wrong track numbers, press 7STOP/CANCEL on the main unit or
CANCEL on the remote control unit and repeat from step 3.
If the display shows "TRACK PROTECTED", one of the selected tracks has been
protected against accidental erasure by another component. You cannot edit such a
protected track. To cancel the editing, press EDIT on the main unit or on the remote
control unit.
Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the recording may not be able to play later.
The data in memory is written in the MD also when the power is turned off while
"EDITING" is being displayed.
Blinks
Blinks
Example)
When track No. 1 and 2 are selected
Blinks
Decrements by 1
Blinks
1 2 3 4 5
6
Blinks
1 2 3 4 5
6
Blinks
1 2 3 4 5
6
1 2 3 4 5
21

Advertisement

Table of Contents
loading

Table of Contents