Table of Contents
Advertisement
6 Press 0 to eject the MD.
The data in memory is written in the MD before it is ejected.
The display shows "UTOC writing" during MD writing operation.
•
Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the title may not be able to appear during a later
playback.
•
The data in memory is written in the MD also when the power is turned off while
"EDITING" is being displayed.
To cancel editing:
Press TITLE before pressing ENTER in step 5.
To assign a track title during playback or recording
You cannot assign a disc title during playback or recording. To assign a disc title, follow the
procedure explained on pages 26 to 28.
1 Press TITLE on the main unit or on the remote control
during playback or recording.
TITLE
OR
Each press of the button switches the title assignment function on and off.
•
You can assign a title to the currently playing or recording track.
2 Input the track title name.
•
For detailed description, refer to pages 26 to 28.
However, note that the function of 7STOP/CANCEL on the main unit differs. If
you press the button, MD recorder stops playing or recording and finishes the title
assignment procedure at this point ("EDITING" appears).
3 Press ENTER on the main unit or on the remote control
ENTER
unit.
OR
The display shows "EDITING" and the TOC indicator lights up.
Next, the display shows the disc title name and then shows the track number and the
total playing time.
•
If it is during playback, the track will be played repeatedly until ENTER is pressed.
Pressing ENTER stops the playback.
•
If it is during recording, recording continues even after ENTER is pressed.
If ENTER is not pressed until the end of the track, the characters input before the
end of the track are recorded as a track title.
4 Press 0 on the main unit or on the cover panel of the
OR
remote control unit to eject the MD.
The data in memory is written in the MD before it is ejected.
The display shows "UTOCwriting" during MD writing operation.
•
Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the title may not be able to appear during a later
playback.
•
The data in memory is written in the MD also when the power is turned off while
"EDITING" is being displayed.
To cancel editing:
Press TITLE on the main unit or on the remote control unit before pressing ENTER in step
3.
29
Advertisement
Table of Contents
