Table of Contents
Advertisement
Signal cable connections ——————————————
Example: Amplifier/Tuner
Example: CD player
RIGHT
LEFT
IN
(REC)
ANALOG
OUT
(PLAY)
COMPU LINK- 3
(SYNCHRO)
Connect to the COMPU LINK-3 (SYNCHRO) jack of another
JVC component equipped with the COMPU LINK remote control system.
See page 30.
6
Connection
Audio pin cords
Connect to the MD jacks, TAPE jacks, etc. of an external unit.
Always connect the jacks with the plugs of the same colors so as not to fail in the L
(Left) and R (Right) connections.
Connect the OUT (PLAY) jacks to the IN (PLAY) jacks of the external unit, and the IN
(REC) jacks to its OUT (REC) jacks.
DIGITAL IN
1- OPTICAL- 2
AC IN
Optical digital cable
Connect to the DIGITAL OUT
jack of your DBS tuner, etc.
Be sure to remove the protective cap
before using the DIGITAL IN terminals.
Keep the cap in a safe place so you can
replace it when not using the DIGITAL
IN terminals.
Audio pin cord (supplied)
Optical digital cable (supplied)
Optical digital cable
Connect to the DIGITAL OUT jack of the CD player, for
example.
TEXT COMPU LINK
1 (MASTER UNIT)
2 (SLAVE UNIT)
Connect to the TEXT
COMPU LINK jack of
another JVC component
equipped with the TEXT
COMPU LINK remote
control system.
See pages 31 and 32.
Advertisement
Table of Contents
