Options During A Call - Nokia 7650 User Manual

Tip! To change the
speaker during an active
call, press . See
'Built-in loudspeaker', p.
13.
Tip! To adjust the
phone tones for different
environments and events,
for example, when you
want your phone to be
silent, see 'Profiles', p. 88.
Tip! To end both
calls at the same time,
select Options→End all
calls and press OK.
18
Copyright © 2002 Nokia. All rights reserved.
• when the sliding keypad is open, press
• To end the call, press
If you do not want to answer a call, press
Tip! If you have activated the
example, to your voice mailbox, rejecting an incoming call will also divert the call.
See 'Settings for call diverting', p. 19.
When a call comes in, press Silence
Note: Active data or fax calls are not ended when the sliding keypad is closed.
Note: It is possible that the phone assigns a wrong name for the phone number. This
happens if the phone number of the caller is not stored in Contacts but the seven
last digits of the number match another number that is stored in Contacts. In this
case, call identification is not correct.
Call waiting (network service)
If you have activated the Call waiting service, the network will notify you of a new
incoming call while you have a call in progress. See 'Call waiting: (network service)', p. 28.
1 During a call, press
To switch between the two calls, press Swap.
2 To end the active call, press

Options during a call

Many options that you can use during a call are network services. Press
call for some of the following options:
Mute or Unmute, End active call,
participant, Answer, and Reject.
Swap is used to switch between the active call and the call on hold
.
or close the sliding keypad.
. The caller will hear a "line busy" tone.
Call divert→ If busy function to divert calls, for
to quickly mute the ringing tone.
to answer the waiting call. The first call is put on hold.
.
End all calls, Hold or Unhold, New
Options during a
call, Conference, Private, Drop