Page 1
NSX-SZ20E AZG-1 YZD8RDCM • This Service Manual is the “Revision Publishing” and replaces “Simple Manual” NSX-SZ20<HA>, (S/M Code No. 09-99C-423-4T2) and NSX-SZ20/SZ20E<HR,HA>, (S/M Code No. 09-001-423-4T3). • If requiring information about the CD mechanism, see Service Manual of AZG-1 ZD8RDM / YZD8RDM, (S/M Code No. 09-001-335-3N6) and AZG-1 YZD8RDCM, (S/M Code No.
http://www.xiaoyu163.com PROTECTION OF EYES FROM LASER BEAM DURING SERVICING 3 7 63 1515 0 This set employs laser. Therefore, be sure to follow carefully CAUTION the instructions below when servicing. Use of controls or adjustments or performance of proce- dures other than those specified herin may result in WARNING!! hazardous radiation exposure.
http://www.xiaoyu163.com NOTE ON BEFORE STARTING REPAIR 1. Forced discharge of electrolytic capacitor of power supply block 3 7 63 1515 0 When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across the electrolytic capacitors (C101, 102) even though AC power cord is removed.
Page 5
http://www.xiaoyu163.com 3 7 63 1515 0 In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not. 2-2. Regarding reset There are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC power cord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed.
http://www.xiaoyu163.com TRANSISTOR ILLUSTRATION 3 7 63 1515 0 E C B E C B B C E E C B CD1585BC 2SC3331 2SB1370 DTC114ES CSA952K KTC3199GR CSC4115BC KTA1266GR KTC3198GR S D G 2SK360E 2SJ460 2SK2158 KRC102S 2SA1235F 2SK2541 KRC104S 2SC2714 2SC3052F RT1N141C CMBT5401...
http://www.xiaoyu163.com SPEAKER DISASSEMBLY INSTRUCTIONS 3 7 63 1515 0 Type.1 Type.4 Insert a flat-bladed screwdriver into the position indicated by the TOOLS arrows and remove the panel. Remove the screws of each speaker 1 Plastic head hammer unit and then remove the speaker units. 2 (() flat head screwdriver 3 Cut chisel How to Remove the PANEL, FR...