Advertisement
controlling your boilermate
2000
Your BoilerMate 2000 is a highly advanced
T h e r m a l S t o r a g e S y s t e m w h i c h
incorporates the latest in microprocessor
technology to monitior your system
automatically and ensure it operates
at maximum efficiency. This includes
periodically 'spinning' the heating pump to
prevent seizing during prolonged unused
heating periods.
In normal circumstances, you should only
be required to adjust the time clock on
your Thermal Store, to suit your needs, and
the instructions for this are described in
detail on the label fitted to the appliance.
If your hot water or heating system should
fail to operate satisfactorily, you will need
to call a service engineer, who can then
contact Gledhill Technical Department for
any advice he may need or operate the
'SWITCH' option which is fitted to your
BoilerMate 2000. [See 'Switch' at the back
of this booklet]
As detailed previously, the Thermal Store
controls the temperature of the system.
In order to ensure your system operates at
its most efficient the boiler thermostat
should always be left at maximum.
* If you wish to draw a considerable
quantity of hot water you will get an
enhanced performance from your thermal
store by setting your time clock to bring
the heating on 20 minutes earlier.
Page 7
user instructions
Advertisement
