Lenovo ThinkPad R61 Hardware Maintenance Manual page 91

Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
1
Product label
2
Homologation label
Following labels need to be peeled off from the old base cover, and need to
be put on the new base cover.
3
Wireless LAN LMA label
4
SIM ICCID label
5
Windows license label (COA)
6
Wireless WAN LMA label
7
SIRM label
8
Israel label
9
China modem label
10 Wireless WAN IMEI label or wireless WAN ESN label
11 Wireless WAN MAC address label
12 MAC address label
13 Serial number label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer the following figure:
13
12
11
10
9
8
Removing and replacing a FRU
3
1
2
7
ThinkPad R61 (15.4-inch widescreen)
4
5
6
85