Removing and replacing a FRU
When installing:
1. Route the antenna cables along the cable guides and secure them with the
2. Make sure that the LCD connector is attached firmly.
80
MT 7642, 7643, 7644, 7645, 7646, 7647, 7648, 8914, 8918, 8919, 8920, 8927, 8928, and 8929
tapes. As you route the cables, make sure that they are not subjected to any
tension. Tension could cause the cables to be damaged by the cable guides, or a
wire to be broken.
5
5