Removing and replacing a FRU
When installing:
v Before you attach the fan assembly to the computer, apply thermal grease, at an
v Make sure that the fan connector is attached firmly.
v When attaching the fan assembly to the frame, take care not to damage the heat
76
MT 7642, 7643, 7644, 7645, 7646, 7647, 7648, 8914, 8918, 8919, 8920, 8927, 8928, and 8929
amount of 0.2 grams, on the part marked a as in the following figure. Either
too much or too less application of grease can cause a thermal problem due to
imperfect contact with a component.
sink ( b ) of the fan assembly.
b
a
b