Tecknet M001 User Manual page 4

USB Nano Receiver
While not in use, the receiver can be removed and safely stored in the
battery compartment.
Auto saving function
If the mouse is not used for 8 minutes it will enter sleep mode. Press
any button to restart. Please turn the mouse off when not in use.
Note: Remove the battery if the mouse is not going to be used tor
prolonged period of time
DPI Switch
The mouse supports 2000DPI, 1500DPI and 1000DPI.
To switch to either setting, press the DPI button.
• The default setting is 1000DPI.
• Short-press the DPI button on the top of the mouse once to switch
from 1000DPI to 1500DPI, the scroll wheel LED will flash twice.
• Short-press the DPI button on the top of the mouse once again to
switch from 1500DPI to 2000DPI, the scroll wheel LED will flash three
times.
• Short-press the DPI button on the top of the mouse once again to
switch from 2000DPI to 1000DPI, the scroll wheel LED will flash once.
Take out the receiver
Store the receiver