Connecting The Ac Power Cord; Attaching The Input Adaptor - Sony LMD-1410 Operating Instructions Manual

Connecting the AC
Power Cord
Connect the supplied AC power cord as illustrated.
1
Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC IN socket
AC plug holder (Supplied)
2
Slide the AC plug holder over the cord until it locks.
To remove the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
AC power cord
Attaching the Input
Adaptor
LMD-1420/2020
Before attaching the input adaptor, disconnect the power
cord.
Note
Do not install the equipment other than BKM-320D.
It causes to damage the unit or the equipment.
Connecting the AC Power Cord / Attaching the Input Adaptor
17