Remote "Dc Out" Control - Monster Power PowerSource Signature HTPS 7000 MKII Owner's Manual

Remote "DC Out" Control Hook-Up
This feature connects your PowerSource to an automated Home Theater control system or allows the PowerSource
to automatically turn on and off another component with a Remote "DC In" connection.
A) Plug one end of the 1/8" miniplug into the corresponding Remote "DC Out" connection
on the PowerSource.
B) Plug the other end of the 1/8" miniplug into the Remote "DC In" connection on the component
that you want the PowerSource to control. Note: This component may not label the connection "DC In".
Make sure it accepts control voltages between 3-30 volts DC.
NOTE: One (1) 1/8" miniplug cable
is supplied with the PowerSource.
20
������������������
From Control
Component
�����
�����
������
�����
����
To Control Components
���