Table of Contents
Advertisement
Detect Interval (sec)
No-Reply Count
Detect Destination Host
(IP or Domain Name)
IP Alias List
Apply
Reset
D
H
C
P
D
H
C
P
If the WAN interface is set as a DHCP client, the VigorTalk ATA-24 SH will ask for IP
network settings from the DHCP server or DSL modem automatically. It is not necessary for
users to manually configure the adapter.
VigorTalk ATA-24 SH Series User's Guid
Request supported in ATA24-SH.
Assign an interval period of time for each detecting. The
minimum value is 3 and no limit for maximum value.
Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
received by the adapter, the connection of WAN interface will
be regarded as breaking down.
Assign an IP address or Domain name as a destination to be
detected whether the host is active (sending reply to the
adapter) or not. If not, the connection of WAN interface will
be regarded as breaking down. This function is available
when Detect Type is set with Send PING or Send Http
Request.
Sets other IP addresses binding in this interface. You can set up
to 32 sets of IP alias settings. If you have typed addresses here,
you can see and choose it in later web page settings.
Click Apply to go back to the WAN Interface Configuration
page. To apply all settings, click Apply on the WAN Interface
Configuration page and reboot your adapter.
Click this button to clear all the configurations for this page.
C
o
n
f
i
g
u
r
a
t
i
o
n
C
o
n
f
i
g
u
r
a
t
i
o
n
e
32
Advertisement
Table of Contents
