Table of Contents
Advertisement
<Ton3>
<Toff3>
<Ton4>
<Toff4>
<Port number>
<Mode>
<Port>
<Redundancy>
<port>
<VBD>
Note: "Auto Discovery NAT IP Address" option is used when ATA-24 SH is
behind a NAT adapter, NAT uses dynamic WAN IP address like as DHCP client.
There must be having a STUN server in Internet. ATA-24 SH needs to negotiate
with STUN server for this function.
Note: The "STUN"(Simple Traversal of UDP through NATs) server is an
implementation of the STUN protocol that enables STUN functionality in
SIP-based systems. STUN is an application-layer protocol that can determine the
public IP and nature of a NAT device that sits between the STUN client and
STUN server.
A
.
7
.
6
S
I
P
C
o
m
m
A
.
7
.
6
S
I
P
C
o
m
m
- Help in the sip configuration function
- Enter incallbarring configuration function
- Display allow list of incoming calls (for SIP)
- Edit allow list of incoming calls (for SIP)
- Delete allow list of incoming calls (for SIP)
- Display deny list of incoming calls (for SIP)
- Edit deny list of incoming calls (for SIP)
- Delete deny list of incoming calls (for SIP)
a
n
d
s
a
n
d
s
ATA24-SH/voip/sip> ?
ATA24-SH/voip/sip> incallbarring
ATA24-SH/voip/misc> allow –s
ATA24-SH/voip/misc>allow -s <Index>
ATA24-SH/voip/sip> allow -e <Index> <Name> <IP/Domain>
ATA24-SH/voip/sip> allow -d <Index>
ATA24-SH/voip/sip> allow –d
ATA24-SH/voip/misc> deny –s
ATA24-SH/voip/misc> deny -s <Index>
ATA24-SH/voip/sip> deny -e <Index> <Name> <IP/Domain>
ATA24-SH/voip/sip> deny -d <Index>
ATA24-SH/voip/sip> deny –d
Ton3 of cadence, unit: (ms)
Toff3 of cadence, unit: (ms)
Ton4 of cadence, unit: (ms)
Toff4 of cadence, unit: (ms)
1 to 65535
0: Disable
1: Enable
T.38 Starting Port, 1 to 65535 (default:13456)
T.38 Redundancy Number, 0 to 4 (default:1)
device port number
0: Auto Detection
1: Modem
2: Fax
111
VigorTalk ATA-24 SH Series User's Guide
Advertisement
Table of Contents
